K & N question for 350 MPI. Want 4bbl sound back!
#1
Registered
Thread Starter
Join Date: Nov 2003
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
K & N question for 350 MPI. Want 4bbl sound back!
I switched motors from the 260HP 4 bbl to the 300Mpi, and my wife even noticed that we lost the cool 4bbl sound. If I put on a K&N filter system (if they make one), would I gain some of this intake sound back? My buddy just put one in his 01 chevy siverado with the 5.3, and it sounds awesome. I have the same truck with the stock filter. Where do I get this and what are the pro's and con's? Thanks, J.
#7
VIP Member
VIP Member
Re: K & N question for 350 MPI. Want 4bbl sound back!
It's probably due more to
the differences in the throttle
body and intake, than the flame
arrestor.
the differences in the throttle
body and intake, than the flame
arrestor.
#8
Registered
Thread Starter
Join Date: Nov 2003
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: K & N question for 350 MPI. Want 4bbl sound back!
In a 2001 Chevy, there is a huge difference in sound between a stock air filter system, and a K&N system. That is what I was hoping for in the boat setup. Thanks for the replies. Justin
#10
Re: K & N question for 350 MPI. Want 4bbl sound back!
Originally Posted by tssteph
It gets a little louder, not much though. I had a set on mine.
Is that thing U.S.C.G. certified?