Roller lifters input
#34
Re: Roller lifters input
Originally Posted by Johnny DCB
I must have missed something,I thought the 66291 were Crowers?You had good luck with them though right?
What model DCB do you have?
#35
Registered
Re: Roller lifters input
Chris
Just to clarify are you talking about the morel lifters??? Lifters and p/rods are the last thing I need to pick up to finish my 502 project and I'm leaning toward morels if I can find them at a decent price. (hyd-rollers) Lift is high 5,s with a pro charger...... Also Scott,(cfm) suggested I ask you for a good machine shop in so. calif ?? Thankyou
Jere
Just to clarify are you talking about the morel lifters??? Lifters and p/rods are the last thing I need to pick up to finish my 502 project and I'm leaning toward morels if I can find them at a decent price. (hyd-rollers) Lift is high 5,s with a pro charger...... Also Scott,(cfm) suggested I ask you for a good machine shop in so. calif ?? Thankyou
Jere
#36
Re: Roller lifters input
Originally Posted by GPM
I didn't have good luck with the Crower Groove Lock solid lifters, I haven't had had any problems with the Crower Severe Duty 66291 w/ hppo option, again solid roller. Sorry for the confusion.
What model DCB do you have?
What model DCB do you have?
It's a Mach26.
#37
Banned
Join Date: Jan 2005
Location: Tri-Cities, TN
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roller lifters input
jere,
You can call me or e-mail me and I will give you some suggestions.
423 854 0007 Office
[email protected]
Chris
You can call me or e-mail me and I will give you some suggestions.
423 854 0007 Office
[email protected]
Chris
#38
Re: Roller lifters input
Originally Posted by Johnny DCB
Thanks for clearing that up.Looks like I'm gonna go with a .903 lifter from Jesel or Crower Severe Duty's.
It's a Mach26.
It's a Mach26.
#39
Re: Roller lifters input
Originally Posted by GPM
The Mach 26 is a very nice boat, they can handle the speed.
#40
Charter Member #601
Charter Member
Re: Roller lifters input
Just a thought here.. the solid rollers.. it was mentioned they can handle 6-8k rpm.. but how do they handle 600 rpm for all the no wake zones? I think that is where my problem exsists.. low rpm, at least that is what I have been told..