Bravo One oil leak- Help!
#11
Charter Member #601
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
DR,
It is a regualar 3/8" coarse thread. I use a 3/8" bolt with the head cut off with a hole drilled thru it to fill it.
It is a regualar 3/8" coarse thread. I use a 3/8" bolt with the head cut off with a hole drilled thru it to fill it.
#12
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I took the fitting and hose off my hand pump, put a barb fitting on the hose, screwed fitting into a valve with a gauge, put an quick disconnect on the other side of the valve to connect to the air compressor.
Don't go over 10 psi!!!!
Don't go over 10 psi!!!!