Set Timing?
#2
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Talking](/forums/images/icons/icon10.gif)
What ignition are you running? plus, what ehaust are you running? When I build that type of engine I usually run 34 degrees total at 4000 RPM. If I think the customer is going to possibly get 89 or less fuel out on the water, I'll turn it back to a moderate 31 to 32 degrees. Dont need any melt downs !!
John
John
#3
Registered
Thread Starter
Join Date: Oct 2004
Location: CHESAPEAKE,VA
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Pwrbt33
What ignition are you running? plus, what ehaust are you running? When I build that type of engine I usually run 34 degrees total at 4000 RPM. If I think the customer is going to possibly get 89 or less fuel out on the water, I'll turn it back to a moderate 31 to 32 degrees. Dont need any melt downs !!
John
John