Port Matching 502 MPI Intake
05-12-2005, 10:46 PM
#1
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Port Matching 502 MPI Intake
How important is it to port match this intake to the rectangular heads?
There seems to be a huge difference in port size.
How much affect does this have considering I will only be able to go into the intake maybe .750 inch and the rest of the runner is much smaller?
I already have completed the shorter runner mod.
Does anyone have any flow bench data or dyno experiance with this?
Thanks.
There seems to be a huge difference in port size.
How much affect does this have considering I will only be able to go into the intake maybe .750 inch and the rest of the runner is much smaller?
I already have completed the shorter runner mod.
Does anyone have any flow bench data or dyno experiance with this?
Thanks.
05-13-2005, 01:14 AM
#2
Platinum Member
Platinum Member
Re: Port Matching 502 MPI Intake
I been hacking and grinding on mine for past 6 wks,i may have it flowed this wknd,i'm at least going to post some pics of the twin fuel rails i been working on,Smitty
05-13-2005, 10:20 PM
#3
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Port Matching 502 MPI Intake
Well I did it anyhow. Just could not live with that big of a difference between ports.
Still would like to hear from some of you guys with experiance.
Cheers.
Still would like to hear from some of you guys with experiance.
Cheers.
