Last question, Is 750 Sea Demon to small for 496
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ok I don't need any more problems
Is my 750 Barry Grant Sea Demon going to be to small
for my 454 stroked to a 496.
Last thing I need is a lean condition.
JIM
![EEK!](/forums/images/smilies/eek.gif)
Is my 750 Barry Grant Sea Demon going to be to small
for my 454 stroked to a 496.
Last thing I need is a lean condition.
JIM
#2
SORE MEMBER
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
Even allowing +15% over these numbers you should be fine
This is based on 496 inches at 5400rpm max
Total airflow requirements:
658.75 cfm
49.49 pounds of air.
3.36 pounds of fuel
Fuel Supply requirements:
0.56 gallons per minute for 14.7 A/F ratio.
38.66 gallons per hour for 12.8 A/F ratio.
146.33 liters per hour for 12.8 A/F ratio.
Here is the link http://www.smokemup.com/auto_math/airflow.php
the plus 15% is for marine applications based on what I have seen in this forum
This is based on 496 inches at 5400rpm max
Total airflow requirements:
658.75 cfm
49.49 pounds of air.
3.36 pounds of fuel
Fuel Supply requirements:
0.56 gallons per minute for 14.7 A/F ratio.
38.66 gallons per hour for 12.8 A/F ratio.
146.33 liters per hour for 12.8 A/F ratio.
Here is the link http://www.smokemup.com/auto_math/airflow.php
the plus 15% is for marine applications based on what I have seen in this forum