Mesa Just Finished 35 Motion For Alex
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Guys it's 5:45 pm and raining we just sent Alex home with his 35 Motion with two MB800SC's he's been working on it for the past 6 months to finish it and tomorrow we water test it I'll update you guys and let you know the first time out how it went . But I can tell you he's tickled ****less .
#3
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
we splashed last night for the first time and found before we went out the trannys didn't have oil so we topped them and made one quick run without daylight to 4000 and performed flawless no leaks no problems Alex was going crazy after almost one year of paint rigging trailer drives and so on but he said last night was well worth the wait and he's talking about racing some P3 with it. Today were going to try a couple of different props after we change the oil and readjust the valvesand check spring press the engines after setting for a year we pushed the button and started first turn. I'll take some pics in the sun today of the rigging and the engines for the gear heads.
#5
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
here are some motor pics on a Saturday with little Laz helping me get the tune-up finished to go to the go kart track . We finally tested some different props yesterday and ran a 129.8 mph with about 600rpm left the props were not right. We're going to try some 5 blade sets on Monday. Alex did say he wants to tone it down and get rid of the blowers when we see what it'll run he wants it to run 115 without the blowers and he'll be happy.
#6
![Default](/forums/images/icons/icon1.gif)
Awww keep the blowers . Just hold back on the go sticks
Motor looks great,Be carfull
![Drink](/forums/images/smilies/drink.gif)
Motor looks great,Be carfull
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.