Oil Pan for BBC
#1
Registered
Thread Starter
Join Date: May 2004
Location: Orlando, Florida
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pan for BBC
I need an oil pan for my build, can someone please point me to a decent vendor. I'm familiar with the main vendors within the classifieds.
Or if anyone has a factory 454/502 Mercruiser pan they want to part with let me know.
Thanks.
Or if anyone has a factory 454/502 Mercruiser pan they want to part with let me know.
Thanks.
#2
Platinum Member
Platinum Member
Re: Oil Pan for BBC
I'm running a hardin 14 qt pan on mk 4 merlin block,its fit and finish are NOT impressive. I tried using a felpro 1 piece retro gskt originally and you could slide a .010 feeler gauge thru rail area into block,it would have leaked for sure. It needs a 1/2 tube of good RTV to even think about sealing,Smitty
#3
Registered
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oil Pan for BBC
#4
Registered
Thread Starter
Join Date: May 2004
Location: Orlando, Florida
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oil Pan for BBC
Crud.
I'm running a Gen IV.
On a side note I picked up a Hamburgers 10 quart from Summit for $199. After looking at Milidon, Moroso, and Canton.
I'm running a Gen IV.
Originally Posted by hpy540
On a side note I picked up a Hamburgers 10 quart from Summit for $199. After looking at Milidon, Moroso, and Canton.
Last edited by TwinTurboStroker; 06-29-2005 at 08:30 AM.