Marine Lubrication
#1411
Gold Member
Gold Member
Join Date: Sep 2005
Location: Missouri
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
#1412
Gold Member
Gold Member
Join Date: Sep 2005
Location: Missouri
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
Well that is an option if I can not find/fix the gas dilution issue. Thanks.
#1413
Registered
Join Date: Feb 2008
Location: Michigan
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
#1414
Gold Member
Gold Member
Thread Starter
#1415
Registered
Why would you want a "bubble" of gas floating around in your crankcase with the possibility of getting picked up and pumped to the bearings. Gas is a lousy lubricant and has no film strength what so ever. I would think this double ester product with a fuel dilution issue would be a recipe for potenial diaster. If I had a fuel dilution issue, I would want to make sure the fuel was absorbed by the lubricant and I would change my oil sooner.
Ken
Ken
#1416
Registered
Just thought I'd throw something out to all the regulars of this thread:
The point of threaded forums is so that information is convienently searchable. I used to keep up with this thread religiously, but it's gotten so big, it's always hard to tell where I left off. I can imagine how intimidating it is for someone new. Not only that, but much of the intial info is now irrelavent due to new product release. A new person would not know where to start.
I think it would be REALLY nice if everyone didn't keep trying to put ALL lubrication info in one very old thread. If each lubrication topic was given a new thread, it would be much easier to find a specific discussion (if you spend any amount of time in this thread, you will see there are really about 100 discusions that should each have it's own thread).
There is SOOOO much great info here, but the way the thread has been continued kind of defeats the point of threaded forums.
The point of threaded forums is so that information is convienently searchable. I used to keep up with this thread religiously, but it's gotten so big, it's always hard to tell where I left off. I can imagine how intimidating it is for someone new. Not only that, but much of the intial info is now irrelavent due to new product release. A new person would not know where to start.
I think it would be REALLY nice if everyone didn't keep trying to put ALL lubrication info in one very old thread. If each lubrication topic was given a new thread, it would be much easier to find a specific discussion (if you spend any amount of time in this thread, you will see there are really about 100 discusions that should each have it's own thread).
There is SOOOO much great info here, but the way the thread has been continued kind of defeats the point of threaded forums.
#1417
Gold Member
Gold Member
Join Date: Sep 2005
Location: Missouri
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
Good point.
Just thought I'd throw something out to all the regulars of this thread:
The point of threaded forums is so that information is convienently searchable. I used to keep up with this thread religiously, but it's gotten so big, it's always hard to tell where I left off. I can imagine how intimidating it is for someone new. Not only that, but much of the intial info is now irrelavent due to new product release. A new person would not know where to start.
I think it would be REALLY nice if everyone didn't keep trying to put ALL lubrication info in one very old thread. If each lubrication topic was given a new thread, it would be much easier to find a specific discussion (if you spend any amount of time in this thread, you will see there are really about 100 discusions that should each have it's own thread).
There is SOOOO much great info here, but the way the thread has been continued kind of defeats the point of threaded forums.
The point of threaded forums is so that information is convienently searchable. I used to keep up with this thread religiously, but it's gotten so big, it's always hard to tell where I left off. I can imagine how intimidating it is for someone new. Not only that, but much of the intial info is now irrelavent due to new product release. A new person would not know where to start.
I think it would be REALLY nice if everyone didn't keep trying to put ALL lubrication info in one very old thread. If each lubrication topic was given a new thread, it would be much easier to find a specific discussion (if you spend any amount of time in this thread, you will see there are really about 100 discusions that should each have it's own thread).
There is SOOOO much great info here, but the way the thread has been continued kind of defeats the point of threaded forums.
#1418
Gold Member
Gold Member
Join Date: Sep 2005
Location: Missouri
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
Hydrocruiser,
I did not find anything on the motul web site about gas versus Motul mixing characteristics but it does say that the oil bonds with the metal versus relying on viscosity for lubrication.
http://www.motul.com.my/eng/fact_sheets/estel_oil.html
I presume that is what you were refering to and not that the gas would not mix with the double ester oils? Or?
I did not find anything on the motul web site about gas versus Motul mixing characteristics but it does say that the oil bonds with the metal versus relying on viscosity for lubrication.
http://www.motul.com.my/eng/fact_sheets/estel_oil.html
I presume that is what you were refering to and not that the gas would not mix with the double ester oils? Or?
#1419
Gold Member
Gold Member
Thread Starter
Hydrocruiser,
I did not find anything on the motul web site about gas versus Motul mixing characteristics but it does say that the oil bonds with the metal versus relying on viscosity for lubrication.
http://www.motul.com.my/eng/fact_sheets/estel_oil.html
I presume that is what you were refering to and not that the gas would not mix with the double ester oils? Or?
I did not find anything on the motul web site about gas versus Motul mixing characteristics but it does say that the oil bonds with the metal versus relying on viscosity for lubrication.
http://www.motul.com.my/eng/fact_sheets/estel_oil.html
I presume that is what you were refering to and not that the gas would not mix with the double ester oils? Or?
http://www.motorspotstore.com/300v15co.html
Here is the link and info...
#1420
Registered
Join Date: Feb 2008
Location: Michigan
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
High safety margin when the oil is diluted by fuel. Provides high oil pressure and limits
http://www.motorspotstore.com/300v15co.html
Here is the link and info...
http://www.motorspotstore.com/300v15co.html
Here is the link and info...