Bravo 1 engine coupler
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Lake Champlain
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I was just cleaning up the bell housing and engine coupler, getting ready to install the engines after a rebuild... I noticed that one coupler's splines are sharp teeth rather than the nice square edges... I am going to be looking for one.. Can't afford new... The engine rebuilds are draining me...
I have the Famous... Bravo 1 drives.. around the 1988 Vintage.
Would a coupler from a bravo 2 fit a Bravo 1 drive?
Thanks much....
Quikdecision.
I have the Famous... Bravo 1 drives.. around the 1988 Vintage.
Would a coupler from a bravo 2 fit a Bravo 1 drive?
Thanks much....
Quikdecision.
#2
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Well, if in doubt I would find the $$ to get a new one. If you bolt everything up and you blow the coupler it's going to cost a lot more. Don't know about the Bravo 2 coupler. You can compare the part numbers here......
http://www.mercruiserparts.com/
http://www.mercruiserparts.com/
#3
![Default](/forums/images/icons/icon1.gif)
Ive got 2 good ones that will work if youre not using the through prop bullhorns. They are the early style made from aluminum plate. In very good shape. rogue2800 at Hotmail.com