any riggers care to give some FREE advice?
#1
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
any riggers care to give some FREE advice?
need some help. i have a clearance issue between my two center pipes and need a fix and any suggestions would be too kind. thx, ratman
#2
Charter Member #601
Charter Member
Re: any riggers care to give some FREE advice?
ratman... at what point do they touch.. Could you tip the top in and gain clearance or is it right at the bend in the tubes? If you made a wedge you could tip them in some.. That might help?? How about a pic with the two side by side.
#3
Registered
Join Date: Jun 2005
Location: Cayman Islands
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: any riggers care to give some FREE advice?
If they're touching at the tops, maybe you could get some 3/4 " exhaust header/manifold spacers from CP Performance and angle-mill them and install them on one or both of the center headers so they kick the tops outward away from each other?
#4
Re: any riggers care to give some FREE advice?
it all depends where the clearence issue is......bottom or top ????
Like mentioned above, if the problem is high, you maybe able to space out the bottoms.
Like mentioned above, if the problem is high, you maybe able to space out the bottoms.
Thread
Thread Starter
Forum
Replies
Last Post
Big E
General Q & A
8
12-28-2003 08:44 PM
scarabrick
General Boating Discussion
2
01-16-2002 02:20 PM