Any hidden h.p. in 310 MPI's
#3
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any hidden h.p. in 310 MPI's
ditto...... nope.... tear it all down and rebuild from bottom up, the works... it's got weak internals and will fail if you put more hp to it.... been there... done it... rebuild from bottom up or drop in a new motor...
Good luck
Good luck
#4
Registered
Join Date: Mar 2004
Location: Lake Travis, Texas
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any hidden h.p. in 310 MPI's
I was told the same thing with my 310 7.4mpi.
I know of a fellow on here (SearayJim) who tried to up his 7.4mpi's hp. The computer was not programmed perfectly, so it dropped a valve and exploded a piston into literally a million pieces. The rod then went through the block. It was an ugly mess! I saw his motor. He ended up building a hot 540!
===
Sooooo, I went out and found a complete 1999 HP500 carbed motor with 180 hours on it. I went through the top end, valve job, springs, etc., and checked out the bottom end, which looked perfect.
I ended up with about 10k in the HP500. I sold my old 7.4 mpi for 3k, so I have 7k in a wonderful Blue motor!!
Kent
I know of a fellow on here (SearayJim) who tried to up his 7.4mpi's hp. The computer was not programmed perfectly, so it dropped a valve and exploded a piston into literally a million pieces. The rod then went through the block. It was an ugly mess! I saw his motor. He ended up building a hot 540!
===
Sooooo, I went out and found a complete 1999 HP500 carbed motor with 180 hours on it. I went through the top end, valve job, springs, etc., and checked out the bottom end, which looked perfect.
I ended up with about 10k in the HP500. I sold my old 7.4 mpi for 3k, so I have 7k in a wonderful Blue motor!!
Kent
#6
Registered
Thread Starter
Join Date: Jun 2005
Location: NY
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any hidden h.p. in 310 MPI's
Any Good Deals On Motors Out There New Preferably(2)? I Think Blues Are A Little Out Of My Range $$. What Do You Think About 496 Mag H.o.'s ??
#7
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any hidden h.p. in 310 MPI's
Originally Posted by paxtonsc
Any Good Deals On Motors Out There New Preferably(2)? I Think Blues Are A Little Out Of My Range $$. What Do You Think About 496 Mag H.o.'s ??
I can't afford blue, and I want the Merc name on it.
#9
Charter Member #1171
Charter Member
Re: Any hidden h.p. in 310 MPI's
The heads and injection design are the big restrictions in that setup.
Sell it whole and buy a used 502.
Sell it whole and buy a used 502.
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
#10
Registered
Join Date: Aug 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any hidden h.p. in 310 MPI's
Now, I'm a bit apprehensive after finding this post. I've already bought a set of Edelbrock oval port marine heads, HP rods, and Speed Pro 9.19/1 pistons. I intend to use the stock cam and MPI intake, hoping the computer can deal with the mods.