Looking for Hyd Steering
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: California
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Hyd Steering
WTB
Hydraulic Steering, or even extra components if you have them. WPM, Imco, or Marine Machine.
Trying to save a few bucks here and there on a rebuild.
Thanks in advance
Hydraulic Steering, or even extra components if you have them. WPM, Imco, or Marine Machine.
Trying to save a few bucks here and there on a rebuild.
Thanks in advance
Last edited by Craig B; 10-15-2010 at 04:51 PM.
#4
Registered
Join Date: Aug 2004
Location: Sunny, AZ
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Hyd Steering
Are you looking for the the complete unit from the helm back, or just external & still use your existing cable. I have some some new Imco units that I need to move cheap!!!
#5
Registered
Thread Starter
Join Date: Oct 2000
Location: California
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Hyd Steering
Assist only.
Reading page after page, leaning towards a single ram system. Only a 21 ft boat, space to mount the rams is the biggest factor, and don't wanna be to tight if using dual rams (yeah yeah, I know, full to the helm ).
Reading page after page, leaning towards a single ram system. Only a 21 ft boat, space to mount the rams is the biggest factor, and don't wanna be to tight if using dual rams (yeah yeah, I know, full to the helm ).
#6
Re: Looking for Hyd Steering
Originally Posted by FOUNTAINATLAST
Are you looking for the the complete unit from the helm back, or just external & still use your existing cable. I have some some new Imco units that I need to move cheap!!!
full to helm and single.
#7
Re: Looking for Hyd Steering
I have a lot of misc pieces that may be of some help.
2x stainless bravo end caps (may be Fountain copy of Latham)
1x Latham hydraulic helm
3x Latham remote reservoirs (2 are new)
2x New Latham steering filters
2x new steering post
I do not have any extra rams.
Todd
2x stainless bravo end caps (may be Fountain copy of Latham)
1x Latham hydraulic helm
3x Latham remote reservoirs (2 are new)
2x New Latham steering filters
2x new steering post
I do not have any extra rams.
Todd
#9
Registered
Thread Starter
Join Date: Oct 2000
Location: California
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Hyd Steering
Thanks for the responses thus far. My drive is in the shop so I can't pull any measurements. DUH! I'll revisit this thread in another week or two.