Bravo 1 problems
#1
Registered
Thread Starter
Join Date: Sep 2004
Location: Torrance, California
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
When my bravo is in neutral and I turn the prop by hand left to right or right to left, I feel some play before you feel the gears have contact. Is this normal. I felt another out-drive and there was no play at all. I know that on a ring and pinion on a truck there is a small amount of play. Also, this out-drive has less then 20 hours on it. When I check the plug, no signs of water or metal. Any ideas?
#2
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Yes this is normal, The Bravo one lower does have a small amout of gear back lash.........
Last edited by GOODT; 08-11-2005 at 02:10 AM.
#5
Registered
![Default](/forums/images/icons/icon1.gif)
it all depends on how much "some play" is
bravos are supposed to have backlash but not too much, if the blade moves left or right no more than 1/8" to 1/4" then you shouldn't have much to worry about
bravos are supposed to have backlash but not too much, if the blade moves left or right no more than 1/8" to 1/4" then you shouldn't have much to worry about
Last edited by davidwademarine; 08-11-2005 at 10:27 PM.