How do YOU change your oil?
#1
Platinum Member
Platinum Member
Thread Starter
How do YOU change your oil?
I am curious how others change their oil. I am very anal about how i change mine,let me outline MY procedure and see if I'm nuts compared to others or maybe someone can gain insight from my procedure.
First off i have a 540 bbc thats blown and i get ALOT of gas and condensation in my oil. My pan is a 14 qt pan,my line are -12 and hold 1 qt,my filter holds 2 qts and my cooler holds 2 qts,(18-19 total). First i drain all the oil I can thru drain hose out bilge hole,i put hose in a 5 gallon pail and let drain for 5-6 hours. Next i change filter, then i put 6 qts in motor and crank over till it primes in 30 second intervals (to keep from killing starter)w/fuse out of fuel pump and coil dissconnected. I keep cranking over until pressure starts to drop from sucking oil pan dry. I then let the dirty oil that got pushed out of lines and cooler back into motor drain completely than fill with clean oil.I do all this because their is so much dirty oil in cooler and lines that i don't want mixed with clean oil,is this overkill or a good idea,Smitty
First off i have a 540 bbc thats blown and i get ALOT of gas and condensation in my oil. My pan is a 14 qt pan,my line are -12 and hold 1 qt,my filter holds 2 qts and my cooler holds 2 qts,(18-19 total). First i drain all the oil I can thru drain hose out bilge hole,i put hose in a 5 gallon pail and let drain for 5-6 hours. Next i change filter, then i put 6 qts in motor and crank over till it primes in 30 second intervals (to keep from killing starter)w/fuse out of fuel pump and coil dissconnected. I keep cranking over until pressure starts to drop from sucking oil pan dry. I then let the dirty oil that got pushed out of lines and cooler back into motor drain completely than fill with clean oil.I do all this because their is so much dirty oil in cooler and lines that i don't want mixed with clean oil,is this overkill or a good idea,Smitty
#2
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Re: How do YOU change your oil?
I just use the drain hose to suck the oil out. Leaves 2+ quarts in the Teague offshore cooler/lines. I don't worry about the remaining. At 50 hours I don't feel like am anywhere near the end of the M1 20-50's life anyway. With the accusump my system probably holds 12+ total.
#3
Registered
Join Date: Jul 2005
Location: Bay City, MI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do YOU change your oil?
I just use the drain hose also. I keep it changed every 20 hours, so like Wobble said I don't think the M1 is at the end of its life. There's no question your way is better though. BTW I'm running a 496 Mag with a Procharger.
#4
AKA NoMoBoatin
Platinum Member
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do YOU change your oil?
Sounds like it takes a week to change the oil.When it drains from the bottom of pan then i would use a oil changer to suck the rest out from the bottom of the pan.sounds like it would work.
#5
Platinum Member
Platinum Member
Thread Starter
Re: How do YOU change your oil?
My boat is running rich still(I'm taking it to crockett soon and he's going to check the A/f ratio as installed while under way under boost and at idle) so my oil gets fueled up under 20 hours and looks like crap,holds great pressure though but i'm cautious. If i don't purge lines and cooler oil looks real dirty still after changeing it out.Smitty
#6
Platinum Member
Platinum Member
Thread Starter
Re: How do YOU change your oil?
Originally Posted by docmanrich37
Sounds like it takes a week to change the oil.When it drains from the bottom of pan then i would use a oil changer to suck the rest out from the bottom of the pan.sounds like it would work.
#7
Gold Member
Gold Member
Join Date: Oct 2002
Location: Fairport,NY
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do YOU change your oil?
Smitty- I think your procedure is very thorough. Just curious as to how many hours you run the oil before changing it? When you shut the motor off, can you smell gas on the dipstick? Does the oil level ever show higher after a run then before you fired it up? Just curious...Lou
#8
Registered
Join Date: Mar 2004
Location: California
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do YOU change your oil?
I disconnect the exit hose from my pre-oiler and hook up another hose which leads to a five gallon bucket on the ground and flip the switch. In less than a minute my 14 quart pan is drained. Replace the filter and I'm done in less than 5 minutes.
I still have a couple of quarts in my Teague oil cooler and the lines, but I also use Mobil One and don't think it's a big deal to leave it there.
I still have a couple of quarts in my Teague oil cooler and the lines, but I also use Mobil One and don't think it's a big deal to leave it there.
#10
Platinum Member
Platinum Member
Thread Starter
Re: How do YOU change your oil?
Originally Posted by Lmarth
Smitty- I think your procedure is very thorough. Just curious as to how many hours you run the oil before changing it? When you shut the motor off, can you smell gas on the dipstick? Does the oil level ever show higher after a run then before you fired it up? Just curious...Lou
Last edited by articfriends; 08-11-2005 at 03:37 PM.