Mark IV vs. Gen VI

Reply Subscribe

Thread Tools

09-06-2005, 12:12 PM

Mike Paula

Registered

Thread Starter

Join Date: Mar 2005

Location: Las Vegas NV

Posts: 264

Likes: 0

Received 0 Likes on 0 Posts

Mark IV vs. Gen VI

Ok I am replacing a 1990 330 hp 454 Mark IV with a Gen VI motor that is externally balanced. I am sure I need new a flywheel. Can’t seem to find the right pt PN for it. Any one have the part number or a flywheel for that mater? Am I corect in the Mark IV are Internally balanced? Also is the Adapter for the Oil cooler/ remote filter different ( part at the block) different?
thanks
Mike

09-06-2005, 12:25 PM

1BIGJIM

Registered

Join Date: Jun 2004

Location: Omaha, Nebraska. Boat on the Mighty Mo! Longest river in the USA!

Posts: 1,944

Likes: 61

Received 37 Likes on 23 Posts

Re: Mark IV vs. Gen VI

It's externally balanced. Yes the remote filter adapter is different.

09-06-2005, 01:53 PM

Mike Paula

Registered

Thread Starter

Join Date: Mar 2005

Location: Las Vegas NV

Posts: 264

Likes: 0

Received 0 Likes on 0 Posts

Re: Mark IV vs. Gen VI

Called Teague. they have one. 249 for a flywheel...geez. On its way. Also found the Right adapter from CP... thanks

09-06-2005, 02:59 PM

pachangalpina

Registered

Join Date: May 2002

Location: Cumming GA

Posts: 931

Likes: 0

Received 0 Likes on 0 Posts

Re: Mark IV vs. Gen VI

Eventhough they both may be externally balanced, I believe they have different crank shaft flanges which means the bolt pattern on the flywheels are different.

Filter adapters are different.