on engine still overheats at wfo..any ideas
#11
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: on engine still overheats at wfo..any ideas
no bravo drives, i have ssm #3 drives bw trans, no eng water pump, just raw waterpump. no thermastats crossovers one engine is perfect, the other runs 20* hotter all the time and is ok to 4k rpm but starts climbig when i run it wfo. engines were dyno had .52 bcfc . only did is one engine has the power steering cooler and thats the one that gets hot but he cooler is clera the other coolers are new
#12
Registered
Re: on engine still overheats at wfo..any ideas
It was asked but not answered. Do you have water pressure gauges? This is a must check item at this point. If you don't have them, get them.
#13
Charter Member
Charter Member
Re: on engine still overheats at wfo..any ideas
If you have engine flushes make sure the check valve isn't clogged. I've seen this many times and it's easy to overlook.
#14
Masher touches my
Gold Member
Join Date: Aug 2004
Location: Phoenix, Az
Posts: 2,280
Likes: 0
Received 0 Likes
on
0 Posts
Re: on engine still overheats at wfo..any ideas
Originally Posted by ratman
no bravo drives, i have ssm #3 drives bw trans, no eng water pump, just raw waterpump. no thermastats crossovers one engine is perfect, the other runs 20* hotter all the time and is ok to 4k rpm but starts climbig when i run it wfo. engines were dyno had .52 bcfc . only did is one engine has the power steering cooler and thats the one that gets hot but he cooler is clera the other coolers are new
It doesn't surprise me, I've read countless threads where people have cooling issues with crossover tubes. Do a search and you'll get some more ideas. Good luck.
#15
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: on engine still overheats at wfo..any ideas
It was asked but not answered. Do you have water pressure gauges? This is a must check item at this point. If you don't have them, get them.
#16
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: on engine still overheats at wfo..any ideas
It doesn't surprise me, I've read countless threads where people have cooling issues with crossover tubes. Do a search and you'll get some more ideas. Good luck.
#17
Registered
Re: on engine still overheats at wfo..any ideas
You have a restriction somewhere. You need to find it before something bad happens. Start swapping parts or measure the pressure at various points along the waters path.
#18
Registered
Re: on engine still overheats at wfo..any ideas
Originally Posted by ratman
both engines are set up the same one runs nice and cool it's twi is getting hot!
#19
Registered
Re: on engine still overheats at wfo..any ideas
Rat ... pull the Thermo ......I agree with the other guys ....good place to start .... ..and they do hang ..even new ...