Hatch inserts
#1
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
Join Date: May 2003
Location: Andover, Ohio
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
C.P no longer handles them and they won't tell me who made them. Need 2" of clearance on hatches of 35 fountain. Thanks David
#2
Registered
![Default](/forums/images/icons/icon1.gif)
David,
I just had the same problem with my 33' Fountain when I put my blowers on. I finially found inserts at Vicious Marine in Harrision Township, MI. Their phone number is (586) 463-2957 ask for Sparky. He has two molds that he makes them out of. He has a single 4 barrel and a two 4 barrel set up. They are made out of fiberglass, and give you about 2" of clearance. I hope this helps you out.
Greg
I just had the same problem with my 33' Fountain when I put my blowers on. I finially found inserts at Vicious Marine in Harrision Township, MI. Their phone number is (586) 463-2957 ask for Sparky. He has two molds that he makes them out of. He has a single 4 barrel and a two 4 barrel set up. They are made out of fiberglass, and give you about 2" of clearance. I hope this helps you out.
Greg
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by fourplaydave69
C.P no longer handles them and they won't tell me who made them. Need 2" of clearance on hatches of 35 fountain. Thanks David
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)