Plumbing Superchillers
09-18-2005, 09:10 PM
#11
Registered
Join Date: Sep 2002
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Plumbing Superchillers
I would run a 1" pickup for each chiller with separate dumps out the driver side. Separate dumps allow visual comparison of the dump volume from each chiller. Go big on the pickups and braided lines. I ended up going back and upgrading to the 1" pickups and bigger lines. Just more work doing the job twice.
Last edited by zahndok; 09-18-2005 at 09:15 PM.
09-19-2005, 09:19 AM
#14
Registered
Re: Plumbing Superchillers
When I flush I take the garden hose and stuff it up against
the transom dump and back feed it!
the transom dump and back feed it!
09-19-2005, 01:26 PM
#15
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Plumbing Superchillers
backflush the chiller through the dumps
and don't forget the sea strainer.
the cooler core is more than half the
cost of the whole kit, hate to see anything
get damaged because of unstrained water
OHH and if you have any questions or need
a plumbing diagram for the intercooler give
me a call and i will fax it to you
661-295-7000
Adrian
and don't forget the sea strainer.
the cooler core is more than half the
cost of the whole kit, hate to see anything
get damaged because of unstrained water
OHH and if you have any questions or need
a plumbing diagram for the intercooler give
me a call and i will fax it to you
661-295-7000
Adrian
Last edited by teaguecustommarine; 09-19-2005 at 01:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Buddy OO
General Boating Discussion
23
02-04-2004 01:42 PM
