connector kit
09-26-2005, 07:44 AM
#1
Registered
Thread Starter
Join Date: Sep 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
connector kit
Do anyone sell a kit to couple a Volvo dph drive to a Yanmar 6lp 315 hp? I am just tired of my Bravo III X breaking down. Maybe Volvo drive would be a better option?!
Big thanks!
Jesper
Big thanks!
Jesper
09-26-2005, 11:48 AM
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: connector kit
Have you tried a B3 XR? What exactly is breaking?
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
09-26-2005, 03:45 PM
#3
Registered
Thread Starter
Join Date: Sep 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: connector kit
Thanks for your reply Mbam.
No I have not tried the Bravo 3 xr, is it much stronger?
The thing that happens is that forward gear gets difficult to engage like its slipping,(does cone get worn quickly?)
My local Merc mechanic here in Sweden says it is a common problem with diesel engines coupled to B3
The engine gives approx. 560 ft lbs torque, and the boat is a deep V weighing 5000 lbs, 30 ft long
regards Jesper
No I have not tried the Bravo 3 xr, is it much stronger?
The thing that happens is that forward gear gets difficult to engage like its slipping,(does cone get worn quickly?)
My local Merc mechanic here in Sweden says it is a common problem with diesel engines coupled to B3
The engine gives approx. 560 ft lbs torque, and the boat is a deep V weighing 5000 lbs, 30 ft long
regards Jesper
