Anyone have a used set of gill like HP500 exhaust Manifolds?
#1
Registered
Thread Starter
Anyone have a used set of gill like HP500 exhaust Manifolds?
I am replacing my stock cast set of headers as my procharger m-1 set up needs more breathing room. I have fabricated my through hull exhaust with a Volvo cross over system (between the risers & the transom). My riser requirements are therefore dimensionally needing to be as close to stock cast riser location as possible. The stock risers on the HP500 would have to be cut so as to mate up to the Volvo system. The best deal would be to have risers that mate up to silent choice. Any such devices out there gathering dust???
#3
Registered
Re: Anyone have a used set of gill like HP500 exhaust Manifolds?
I have a set of IMCO Powerflow manifolds with the short riser that is designed for use with silent choice + all brackets etc. for installing on a Gen 5 engine.
Let me know if interested here or send me a PM
Mark
Let me know if interested here or send me a PM
Mark
#4
Registered
Thread Starter
Re: Anyone have a used set of gill like HP500 exhaust Manifolds?
Mark I am interested please contact me 530 5874700 or [email protected]