Need more power!!! Help!!
10-09-2005, 10:09 PM
#11
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
Re: Need more power!!! Help!!
I was going to look into edelbrock heads as a option for the aluminum,you usually get a thicker deck in a aluminum head and the weight savings are not going to hurt.I don't have a closed cooling system but I have alot of friends here in the fresh water running aluminum heads with no corrosion problems.Thanks for the input.
10-11-2005, 10:49 PM
#13
Registered
Re: Need more power!!! Help!!
Are you talking about the GM vortechs or the Edelbrock ETEC vortechs? The GM's are about $250.00 ea. or you can get the SDPC modified ones with screw in studs, guide plates, .600 lift springs for about $390.00 ea. The ETEC's go for for about $1100.00 for the small port ones and $1200.00 for the larger port ones.
10-12-2005, 04:55 PM
#14
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
Re: Need more power!!! Help!!
How much better are the GM vortecs than a stock merc head,I know the stock mercs are known for valve problems,what about the vortecs,I am looking to do a budget engine as I plan on a new boat in a year or two,I just want more out of this one.I think if I can get 50 hp and 50 or so ft lb torque I would be happy with it till a new boat comes.I need twin big blocks next time!!
10-13-2005, 05:37 AM
#15
Registered
Join Date: Nov 2003
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need more power!!! Help!!
Here is the dynosheet of my 350 w/ Vortec heads, 100hrs. no problems...so far. 50hp is easy to get, but I think that you`ll want 100hp to see difference, and it`s not so much more $$$... send me e-mail, if you want the part #`s etc.
Thread
Thread Starter
Forum
Replies
Last Post
PhantomChaos
General Boating Discussion
7
09-24-2002 08:37 AM
