need a Bravo XR 1.50 upper, who's got one
#1
Registered
Thread Starter
need a Bravo XR 1.50 upper, who's got one
Just popped mine over the weekend . I would prefer new, but may consider slightly used/excellent condition used.
Just the complete upper, "old" style (2004 back) preferable.
Thanks,
Steve
Just the complete upper, "old" style (2004 back) preferable.
Thanks,
Steve
#3
VIP Member
VIP Member
Re: need a Bravo XR 1.50 upper, who's got one
Just curious,
What let go ?
I had one expire last month.
Lower gear tooth broke off, got
wedged between pinion, pushed
the bearings forward, broke the case.
Made a hell of a racket
Just cruising at 3600 rpm's, smooth water.
Marc at Bam fixed me up.
What let go ?
I had one expire last month.
Lower gear tooth broke off, got
wedged between pinion, pushed
the bearings forward, broke the case.
Made a hell of a racket
Just cruising at 3600 rpm's, smooth water.
Marc at Bam fixed me up.
#4
Registered
Thread Starter
Re: need a Bravo XR 1.50 upper, who's got one
Originally Posted by JaayTeee
Just curious,
What let go ?
I had one expire last month.
Lower gear tooth broke off, got
wedged between pinion, pushed
the bearings forward, broke the case.
Made a hell of a racket
Just cruising at 3600 rpm's, smooth water.
Marc at Bam fixed me up.
What let go ?
I had one expire last month.
Lower gear tooth broke off, got
wedged between pinion, pushed
the bearings forward, broke the case.
Made a hell of a racket
Just cruising at 3600 rpm's, smooth water.
Marc at Bam fixed me up.
Mine was the upper. Lost a tooth between the gears and pushed them apart. Ruined the upper housing completely.
I was cruising about 45 MPH. The drive had 280 hours on it.
Sorry to hear about your luck. F'ing Bravos ...............
Steve