Barry Grant HELP
11-03-2005, 07:09 PM
#1
Registered
Thread Starter
Join Date: Oct 2004
Location: Lexington, SC
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Barry Grant HELP
Does anyone have a easier way of getting in contact with them. Been trying all week and still no answer or response.I have a bad fuel pump that didnt even last 15 min and need to get it taken care of.
Platinum Member
11-04-2005, 08:02 AM
#5
Banned
Join Date: Jan 2005
Location: Tri-Cities, TN
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Re: Barry Grant HELP
The SEMA show is going on in Vegas. I am sure Doug (RumRunner) and most of BG's tech people are out there so I would expect a long delay this week and the first of next before they get back to you. I will say this they are good about taking care of product issues quickly.
11-08-2005, 06:22 PM
#8
VIP Member
Re: Barry Grant HELP
Most likely RumRunner is at the boat show or somewhere near it !! Give him a few more days.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
11-08-2005, 09:34 PM
#9
Registered
Re: Barry Grant HELP
Superwrench,
We apologize for the problems getting through, not sure where you left a message, but we don't have any from you. Stan sent me an e-mail while I was out in Vegas, but I missed this post. If you'll send the pump directly back to us with a copy of your receipt, return address, and daytime phone number we can get it taken care of.
Barry Grant, Inc.
1450 McDonald Rd.
Dahlonega, GA 30533.
We apologize for the problems getting through, not sure where you left a message, but we don't have any from you. Stan sent me an e-mail while I was out in Vegas, but I missed this post. If you'll send the pump directly back to us with a copy of your receipt, return address, and daytime phone number we can get it taken care of.
Barry Grant, Inc.
1450 McDonald Rd.
Dahlonega, GA 30533.
