Finishing the Twin Turbo Project at Mesa
#21
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by PatriYacht
Laz, why the small bore? Is it going to be raced in a cubic inch limited class? Wouldn't it make more power with a larger bore?
is it cold up there yet , the engines were originally built for class racing and now the customer wants to try his luck at lotto the bottom was done by a very knowledgeable and respected offshore racing crew chief so I respect the effort we'll see how the boat runs but most importantly more R&D into the engines that I feel have no rival in development at this point and time. We've been contacted by a couple of manufacturers about building top quality private label engines and I feel these engines are going to be the ultimate in performance and reliability . If we can build 1200 hp reliable out of 358 ci there is nothing we will not be able to achieve open cubic inch effort such as some of the drag race engines we've developed at over 2300hp . Sincerely Laz Mesa
Thread
Thread Starter
Forum
Replies
Last Post
MESABALANCING
General Q & A
8
07-11-2005 09:59 AM