Bravo HP low water pickup
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have a set of bravo HP's with low water pick ups. They have IMCO shafts. After getting water in one of them 2 years in a row we found the lower case was slightly cracked.
Is this common with the low water pickup?
I have several lowers but all high water pick up style. Should I chage both to high pick ups ( I have a 32 baja no steps).
Does anyone have just a LWP housing?
Is this common with the low water pickup?
I have several lowers but all high water pick up style. Should I chage both to high pick ups ( I have a 32 baja no steps).
Does anyone have just a LWP housing?
#2
Off the Radar
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: May 2001
Location: Short Pump or Colonial Beach, VA
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
I do not think the low water is more subject to cracks, I tried switching to high water and had heating problems with the engines. It all depends on how high the drives are mounted.
I think I would stay with the lows unless you find out more issues with them.
I think I would stay with the lows unless you find out more issues with them.
Thread
Thread Starter
Forum
Replies
Last Post
Waterfoul
General Boating Discussion
27
09-02-2002 09:02 PM