SS Competition Gauges and bezels????
02-23-2006, 11:41 AM
#41
Re: SS Competition Gauges and bezels????
Thanks for the compliments guys. We're just trying to keep great gauges at a low cost for the masses.
The connectors are .250 spade style. Most just cut the terminals off their wires and replace them with female 0.250. You only loose about 3/8" of wire but you have a cheap new terminal that will have "new" electrical contact.
About the hour meter. You can not rotate these (desined on purpose). What I doo is keep my old meters for reference.
Hope this helps
Bob
The connectors are .250 spade style. Most just cut the terminals off their wires and replace them with female 0.250. You only loose about 3/8" of wire but you have a cheap new terminal that will have "new" electrical contact.
About the hour meter. You can not rotate these (desined on purpose). What I doo is keep my old meters for reference.
Hope this helps
Bob
02-23-2006, 11:42 AM
#42
Re: SS Competition Gauges and bezels????
Originally Posted by woody1
I used bobs gauges all last year, love em, no problems and they rock at night 
My persoanl favorite cosmetic feature
Gold Member
02-23-2006, 01:16 PM
#45
Re: SS Competition Gauges and bezels????
Originally Posted by JLAY
Will the gauges work with stock mercury sending units?
We designed them to work with the Mercury standards.
02-25-2006, 07:48 AM
#46
Registered
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Re: SS Competition Gauges and bezels????
I'm not exactly sure how the hour meters work, but I would think that you could just hook them up to a 12v power source (battery charger or something) and let them run until they got to where they needed to be. If you have 240 hours, let them run for 10 days just don't forget about them.
Bob, would that work?
Bob, would that work?
02-25-2006, 08:02 AM
#47
Registered
Thread Starter
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: SS Competition Gauges and bezels????
Just got my garage concrete floor poured and finally got boat back in. My new dash should be done any day now. I have the new SS gauges ready to go along with bezels from Lavorsi. Can't wait to see the new dash!!!
ANYONE??? What does everyone do for re-lettering the names for the rocker switches???
ANYONE??? What does everyone do for re-lettering the names for the rocker switches???
02-25-2006, 08:31 AM
#48
Re: SS Competition Gauges and bezels????
Originally Posted by duunoit
I'm not exactly sure how the hour meters work, but I would think that you could just hook them up to a 12v power source (battery charger or something) and let them run until they got to where they needed to be. If you have 240 hours, let them run for 10 days just don't forget about them.
Bob, would that work?
Bob, would that work?
02-25-2006, 08:33 AM
#49
Re: SS Competition Gauges and bezels????
Originally Posted by East Coast B
Just got my garage concrete floor poured and finally got boat back in. My new dash should be done any day now. I have the new SS gauges ready to go along with bezels from Lavorsi. Can't wait to see the new dash!!!
ANYONE??? What does everyone do for re-lettering the names for the rocker switches???
ANYONE??? What does everyone do for re-lettering the names for the rocker switches???
