gaffrig/livorsi gauges needed
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: sint maarten
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
gaffrig/livorsi gauges needed
redoing dash and need some 2" gauges..
white bezel , white face, black numbers, orange needle, 270 deg sweep, electric. the ones i need to match are less than a year old and say gaffrig on them but i keep hearing livorsi is gaffig and gaffrig is livorsi...etc etc...
need quote from reliable supplier for:
two oil press 0-100
two oil temp
two water pressure (mechanical)
two fuel level
4" GPS speedo IF it can take the signal from my navman 5600 gps.
also a question if anyone knows.... are oil pressure sensors the same construction as fuel pressure sensors ? i.e is a 0-100 op pressure sensor the same one they use for 0-100 fuel pressure ?
this post also in the cig section.
feel free to email me direct w/ quotes at [email protected]
white bezel , white face, black numbers, orange needle, 270 deg sweep, electric. the ones i need to match are less than a year old and say gaffrig on them but i keep hearing livorsi is gaffig and gaffrig is livorsi...etc etc...
need quote from reliable supplier for:
two oil press 0-100
two oil temp
two water pressure (mechanical)
two fuel level
4" GPS speedo IF it can take the signal from my navman 5600 gps.
also a question if anyone knows.... are oil pressure sensors the same construction as fuel pressure sensors ? i.e is a 0-100 op pressure sensor the same one they use for 0-100 fuel pressure ?
this post also in the cig section.
feel free to email me direct w/ quotes at [email protected]
#4
Registered
Join Date: Aug 2004
Location: Sunny, AZ
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: gaffrig/livorsi gauges needed
Give Outdrive Exchange & Performance Marine a call, I know there a dealer for Livorsi & Gaffrig. They've been over & above on there service & price when it has come to getting me set-up with what I needed, 623-693-0470.
#6
Ginger or Mary Ann?
Charter Member
Re: gaffrig/livorsi gauges needed
Originally Posted by FOUNTAINATLAST
Give Outdrive Exchange & Performance Marine a call, I know there a dealer for Livorsi & Gaffrig. They've been over & above on there service & price when it has come to getting me set-up with what I needed, 623-693-0470.
You got that right! I have been talking with them for the last week on some parts. The price they qouted me is 1/2 of what I got on my own.
#7
Registered
Join Date: Aug 2004
Location: Sunny, AZ
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: gaffrig/livorsi gauges needed
Originally Posted by US1 Fountain
You got that right! I have been talking with them for the last week on some parts. The price they qouted me is 1/2 of what I got on my own.
Good to here, there prices are almost to good to be true but everything I have gotten from them has been top notch. I think we might have found another good source for our boats parts.
#8
AKA NoMoBoatin
Platinum Member
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: gaffrig/livorsi gauges needed
Also looking for a couple of old gaffig boost gauges for a friend that's re-rigging his boat.If any blue bezels white face black #'s.email if any info.Thanks in advance Richard.
#9
Masher touches my
Gold Member
Join Date: Aug 2004
Location: Phoenix, Az
Posts: 2,280
Likes: 0
Received 0 Likes
on
0 Posts
#10
AKA NoMoBoatin
Platinum Member
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: gaffrig/livorsi gauges needed
Originally Posted by BADKACHINA
Thread
Thread Starter
Forum
Replies
Last Post
Leathl_WS6
General Q & A
28
04-25-2007 10:11 PM
26scarab
General Boating Discussion
13
01-06-2004 03:39 PM