Rod Length on Bulldog....
#11
Re: Rod Length on Bulldog....
I was thinking the 540 was not a tall deck block????
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#13
Registered
Thread Starter
Re: Rod Length on Bulldog....
The Bulldog is one of the best motors shortblock wise to ever come out of Merc . It's a hand built "tall" deck Bowtie block with a 4340 Lunati crank, Manley H beam rods, blower pistons (low CR), etc...
It is a 4.44 bore X 4.375 stroke as stock but soon to be a 4.560 bore and 572 c.i. on this one
I also understand that this is the same short block used on the 850SCi and 1075SCi bored to 4.5 for ~557ci.
Dave
It is a 4.44 bore X 4.375 stroke as stock but soon to be a 4.560 bore and 572 c.i. on this one
I also understand that this is the same short block used on the 850SCi and 1075SCi bored to 4.5 for ~557ci.
Dave
#14
Banned
Join Date: Jan 2005
Location: Tri-Cities, TN
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rod Length on Bulldog....
Nordic,
There is a guy on Speedwake that is "freshing 2 x Bulldogs. He has a thread in the technical section. You may want to e-mail him and get "hard evidence" of what is in the Bulldog.
Chris
There is a guy on Speedwake that is "freshing 2 x Bulldogs. He has a thread in the technical section. You may want to e-mail him and get "hard evidence" of what is in the Bulldog.
Chris
#15
Re: Rod Length on Bulldog....
Originally Posted by Nordicflame
Thanks RLW...
Nice site with some pretty good reading however maybe I need to clarify my question
"I need to know the rod length in a Bulldog!!"
I'm trying to price out pistons for a rebuild on a clients motor. Just wondering if they will be off the shelf JE stuff or custom order.
Thanks,
Dave
Nice site with some pretty good reading however maybe I need to clarify my question
"I need to know the rod length in a Bulldog!!"
I'm trying to price out pistons for a rebuild on a clients motor. Just wondering if they will be off the shelf JE stuff or custom order.
Thanks,
Dave
#16
MarineKinetics
Platinum Member
Re: Rod Length on Bulldog....
Originally Posted by Nordicflame
The Bulldog is one of the best motors shortblock wise to ever come out of Merc . It's a hand built "tall" deck Bowtie block with a 4340 Lunati crank, Manley H beam rods, blower pistons (low CR), etc...
It is a 4.44 bore X 4.375 stroke as stock but soon to be a 4.560 bore and 572 c.i. on this one
I also understand that this is the same short block used on the 850SCi and 1075SCi bored to 4.5 for ~557ci.
Dave
It is a 4.44 bore X 4.375 stroke as stock but soon to be a 4.560 bore and 572 c.i. on this one
I also understand that this is the same short block used on the 850SCi and 1075SCi bored to 4.5 for ~557ci.
Dave
The piston is Wiseco (Merc part #) and the connecting rod is a Manley +.400" / 6.535".
Bob
#17
Registered
Thread Starter
Re: Rod Length on Bulldog....
Big Block Billy...
Cstraub, Thanks; we have been trading notes already.
Thanks RMB
I should have it out of his boat and apart in a week or two
Cstraub, Thanks; we have been trading notes already.
Thanks RMB
I should have it out of his boat and apart in a week or two