Replace hose on EMI
01-11-2006, 08:33 AM
#1
Registered
Thread Starter
Replace hose on EMI
As you can see from the pic I would like to replace the hose from the exh.to riser with stainless steel braided. I have asked several people for help but was told it is difficult to do without kinking the hose because of the radius. The black hose is 3/4 in. ID. the hose barb is a 1 in. NPT. Looking at the angle what kind of (AN) fittings would I need to complete this application without kinking the hose?
01-11-2006, 02:59 PM
#2
Registered
Thread Starter
Re: Replace hose on EMI
Second question, What would you replace the shi**! black hose with. Judging from the pics of engines that are dressed to kill. I need help.
Thread
Thread Starter
Forum
Replies
Last Post
NJgr8ful
General Q & A
23
06-25-2005 09:53 PM
