Bravo 1 trim indicators?
#1
Registered
Thread Starter
Bravo 1 trim indicators?
I have twin Bravo 1s and Faria guages for trim indication. The guages work intermittently.......
What is most likely the problem?
Thanks.
What is most likely the problem?
Thanks.
#2
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bravo 1 trim indicators?
more then likly its in the senders, but could be any number of things from a bad ground to bad gauges but most times its in the sender leads....
you didnt give very much info...ie: make model type drives ect
you didnt give very much info...ie: make model type drives ect
#4
Registered
Re: Bravo 1 trim indicators?
Could also be the wires are corroded. Replace the sending units, simple and only $80
#5
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bravo 1 trim indicators?
I agree, probably senders, round modules on top sides of outdrive. Sort of a wiper effect sender, just two screws to take them off.
#6
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bravo 1 trim indicators?
1bigjim
glad you think simple to replace...25 years doing this...easy for me but without the right tools and exp. not easy or simple....requires disassembling the transom bell housing(waiting for you to say splice them in..will only live a short time)
glad you think simple to replace...25 years doing this...easy for me but without the right tools and exp. not easy or simple....requires disassembling the transom bell housing(waiting for you to say splice them in..will only live a short time)
#7
Registered
VIP Member
Re: Bravo 1 trim indicators?
Originally Posted by East Coast B
I agree, probably senders, round modules on top sides of outdrive. Sort of a wiper effect sender, just two screws to take them off.
#9
Registered
Re: Bravo 1 trim indicators?
OK I will agree. If you have done it before its simple. It really is No I would never splice a line, that's why you buy the complete kit.
#10
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Re: Bravo 1 trim indicators?
Originally Posted by 1BIGJIM
OK I will agree. If you have done it before its simple. It really is No I would never splice a line, that's why you buy the complete kit.
If you can get it off and apart, clean it thoroughly and fill with di-electric grease. This has worked well for me. Note where it is before loosening the screws.