Max Machine Drives
#1
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Max Machine Drives
Is anyone running their drives on 9500 lb. boat with 800 hp and 800 lbs. of torq. and are they holding up?i'm running max uppers and xz lowers now on mine with the 525's.Is the xz lower the weak link?Thanks in advance Rich.
#2
Registered
Re: Max Machine Drives
Originally Posted by docmanrich37
Is anyone running their drives on 9500 lb. boat with 800 hp and 800 lbs. of torq. and are they holding up?i'm running max uppers and xz lowers now on mine with the 525's.Is the xz lower the weak link?Thanks in advance Rich.
#3
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Max Machine Drives
Originally Posted by Go Big
I have them on a 42 Fountain with 800's Not a problem, and I run pretty hard.
#4
Charter Member # 545
Gold Member
Re: Max Machine Drives
Rich
We ran 540's whippled in a 35 Fountain, I ran IMCO SC's. They lasted about 40 hrs before problems set in. I think you went the right way with your project.
We ran 540's whippled in a 35 Fountain, I ran IMCO SC's. They lasted about 40 hrs before problems set in. I think you went the right way with your project.
#5
AKA NoMoBoatin
Platinum Member
Thread Starter
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Max Machine Drives
Originally Posted by Beak Boater
Rich
We ran 540's whippled in a 35 Fountain, I ran IMCO SC's. They lasted about 40 hrs before problems set in. I think you went the right way with your project.
We ran 540's whippled in a 35 Fountain, I ran IMCO SC's. They lasted about 40 hrs before problems set in. I think you went the right way with your project.
Thread
Thread Starter
Forum
Replies
Last Post
Dean Ferry
General Boating Discussion
15
07-10-2006 03:48 PM