Cam help on a sbc with dry exhust??
#1
Registered
Platinum Member
Thread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Cam help on a sbc with dry exhust??
I am looking to get the most out of this engine. I know this boat should have a BBC but for now I will try to squeeze this to the max. Whats the most cam I should look at (remember I don't have to worry about reversion)
26' Scarab Cv, 3200lbs, bravo 1 drive w/ x-dimension around 16.5''
350 sbc .060 over
Flat top pistons = 9.2 cr
Dart sportsman II heads 2.02/1.60 stainless valves
Crane race gold rockers 1.5 ratio
Performer rpm intake
Sea demon 650cfm carb w/vac secondary & 1"spacer
Gill manifolds w/ 3.5" dry pipes
Cam 223*/234* @ .050"
112* LSA
.475"/. 485" valve lift w/1.5 rockers
26' Scarab Cv, 3200lbs, bravo 1 drive w/ x-dimension around 16.5''
350 sbc .060 over
Flat top pistons = 9.2 cr
Dart sportsman II heads 2.02/1.60 stainless valves
Crane race gold rockers 1.5 ratio
Performer rpm intake
Sea demon 650cfm carb w/vac secondary & 1"spacer
Gill manifolds w/ 3.5" dry pipes
Cam 223*/234* @ .050"
112* LSA
.475"/. 485" valve lift w/1.5 rockers
Last edited by kmiller; 09-18-2007 at 04:58 PM.