Need new raw water pump
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Any suggestions? What happened to the KPM's that Fred had? He no longer lists them. I was going to try one. I have a crusader one right now and i would like to purchase at least a Newer Bravo one pump but i do not want to switch to serpentine belt system. i know there are issues with every pump made but i know i need to upgrade. So after reading all the hype and disagreements about the different types of pumps i still do not know what to buy. Dose anyone have a old Bravo pump that i could buy the kpm kit and retro fit it? I would need just the bracket and the bearing and sheave assembly. Come to think of it my bracket might work. What are the Pn's for the newer bravo pumps? I am running between 650 and 700hp on a 540cid.
#2
Registered
Join Date: Feb 2006
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hi;
if you can email me with the part number of the sherwood pump then we can give you details on fitting and compatabbility.If you can not find the part number measure the diameter of the pulley, and we can track the part from this dimension. All KPM product is now available form our Facility in wisconsin. Speak to dan and he will be able to help you. Visit www.teamkpmracing.com for all details
Regards
Jules
if you can email me with the part number of the sherwood pump then we can give you details on fitting and compatabbility.If you can not find the part number measure the diameter of the pulley, and we can track the part from this dimension. All KPM product is now available form our Facility in wisconsin. Speak to dan and he will be able to help you. Visit www.teamkpmracing.com for all details
Regards
Jules