intercooler cores for blower shop intercoolers
#1
Registered
Thread Starter
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
intercooler cores for blower shop intercoolers
i have a pair of the billet blower shop intercoolers to go under my 1071's. what options are there for replacement of the cores? alum or coppernicke or are there more options? what are the pros and cons and whats the diff in price? thx, ratman
#2
Registered
Re: intercooler cores for blower shop intercoolers
Whaz up Ratman its me Cave.
Three years ago I got the richard lees with the
whipple cupranickel cores. They are more durable
a higher melting point then the alumminum.
Beleave it?? They can melt. according to Dustins site
they produce better chilling due to the metal used.
copper being a better conductor/ dissipator then alluminum.
Randy at Cobra just informed me that the aluminum cores
actualy produce better Hp on the dyno.
With this recent info I can only say what I have I would use
again and until I can actualy compare the two myself
I dont know.
Maybe some Engine builders like JC, Mesa, Mrhorsepower1
can shed some light.
Gerry
Three years ago I got the richard lees with the
whipple cupranickel cores. They are more durable
a higher melting point then the alumminum.
Beleave it?? They can melt. according to Dustins site
they produce better chilling due to the metal used.
copper being a better conductor/ dissipator then alluminum.
Randy at Cobra just informed me that the aluminum cores
actualy produce better Hp on the dyno.
With this recent info I can only say what I have I would use
again and until I can actualy compare the two myself
I dont know.
Maybe some Engine builders like JC, Mesa, Mrhorsepower1
can shed some light.
Gerry
Last edited by knot-right; 02-08-2006 at 06:40 PM.
#3
Registered
Re: intercooler cores for blower shop intercoolers
Originally Posted by knot-right
Whaz up Ratman its me Cave.
Three years ago I got the richard lees with the
whipple cupranickel cores. They are more durable
a higher melting point then the alumminum.
Beleave it?? They can melt. according to Dustins site
they produce better chilling due to the metal used.
copper being a better conductor/ dissipator then alluminum.
Randy at Cobra just informed me that the aluminum cores
actualy produce better Hp on the dyno.
With this recent info I can only say what I have I would use
again and until I can actualy compare the two myself
I dont know.
Maybe some Engine builders like JC, Mesa, Mrhorsepower1
can shed some light.
Gerry
Three years ago I got the richard lees with the
whipple cupranickel cores. They are more durable
a higher melting point then the alumminum.
Beleave it?? They can melt. according to Dustins site
they produce better chilling due to the metal used.
copper being a better conductor/ dissipator then alluminum.
Randy at Cobra just informed me that the aluminum cores
actualy produce better Hp on the dyno.
With this recent info I can only say what I have I would use
again and until I can actualy compare the two myself
I dont know.
Maybe some Engine builders like JC, Mesa, Mrhorsepower1
can shed some light.
Gerry
#4
Charter Member #40
Charter Member
Re: intercooler cores for blower shop intercoolers
Give KE a call. He does a core that is less restrictive, a two pass design, cooper/nickel and supposedly more durable.
#5
Registered
Join Date: Jan 2005
Location: SANTA CLARITA, CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: intercooler cores for blower shop intercoolers
Ratman,
We only make an aluminum core for our intercooler. However, K.E. / Hardin marine makes a cooper-nickle replacement core that fits our housing. We have found the same thing that the aluminum core makes more power, but the cooper-nickle is much more durable. We have not personally tested the K.E. core ourselves, so I can't give you any info on it's efficiency. I am sure if you called K.E. they could provide that info for you.
Hope this help,
Ron Hayes
The Blower Shop
We only make an aluminum core for our intercooler. However, K.E. / Hardin marine makes a cooper-nickle replacement core that fits our housing. We have found the same thing that the aluminum core makes more power, but the cooper-nickle is much more durable. We have not personally tested the K.E. core ourselves, so I can't give you any info on it's efficiency. I am sure if you called K.E. they could provide that info for you.
Hope this help,
Ron Hayes
The Blower Shop
Thread
Thread Starter
Forum
Replies
Last Post
cougarman
General Q & A
1
08-08-2008 11:24 AM
teaguecustommarine
New Products and Member Discounts
4
02-13-2007 04:31 PM