Std. Holesaw sizes for std gauges
#1
Charter Member
Charter Member
Thread Starter
Std. Holesaw sizes for std gauges
Where is the best place to order them from? 2 1/16" hole and 3 3/8" hole. Thanks, Chris
#2
Registered
Re: Std. Holesaw sizes for std gauges
Hey Chris Hows the project ? I'm fixing to buy some myself I'm getting them from a good friend of mine . He sells Matco tools I'll let you know how it works out. The last think I want to do is have a crappy tool when the drilling begins.
#4
Charter Member
Charter Member
Thread Starter
Re: Std. Holesaw sizes for std gauges
The project has been slow, I have been clearing room in the garage to get it in this month. I have been polishing the controls they are looking good but it takes a long time to get the finish perfect. Also adding trim to the throttle handle. Thanks guys for the holesaw info. Chris
#6
Charter Member
Charter Member
Thread Starter
Re: Std. Holesaw sizes for std gauges
Thanks guys, I ordered the ones from McMaster. Von, I could not figure out how to get the aviation punches to work at an angle for my angled bezels so I will try the saws.