454 mag cam question
03-09-2006, 06:56 PM
#1
Registered
Thread Starter
454 mag cam question
Im putting a Lunati flat tappet cam in my 365 mag with low dome pistons stock carb and exhaust (for now), and 188 heads. The cam is 224-234 deg, 534 and 559 lift, with 114 lobe separation. What Kind of idle characteristics can I expect, and installing a new chain and gear setup, should I look to install at 0, or +or- 4 deg? What impact would the timing change have on performance? Thanks
03-09-2006, 07:06 PM
#2
VIP Member
VIP Member
Re: 454 mag cam question
Originally Posted by mark30h
Im putting a Lunati flat tappet cam in my 365 mag with low dome pistons stock carb and exhaust (for now), and 188 heads. The cam is 224-234 deg, 534 and 559 lift, with 114 lobe separation. What Kind of idle characteristics can I expect, and installing a new chain and gear setup, should I look to install at 0, or +or- 4 deg? What impact would the timing change have on performance? Thanks
She should idle nicely and have lots more power then she did stock.
Great choice...
__________________
Patrick
Patrick
