Correct head gaskets for Edelbrock Heads?
#1
Registered
Thread Starter
Correct head gaskets for Edelbrock Heads?
I have a Mark IV bored .060. = 4.310 if my math is correct.
It has the three coolant holes in the lower part of the block.
Is the Felpro 1037 gasket the correct one?
This gasket has a cylinder size of 4.370.
It has the three coolant holes in the lower part of the block.
Is the Felpro 1037 gasket the correct one?
This gasket has a cylinder size of 4.370.