Anyone ever try GM Alum heads
#1
Registered
Thread Starter
Join Date: Sep 2004
Location: Lake Champlain--Otter Creek
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Anyone ever try GM Alum heads
I was thinking maybe a set of casting #12363390
I know a guy who runs the parts department at a chevy dealer. I can buy these heads at cost. I was just wondering if they are worth using on a boat.
They are the heads that come on the crate 502/502
Oval port 110cc combustion chamber 2.25 and 1.88 stainless valves (NOT INCONNEL).
Are they any good?
THEY HAVE TO BE BETTER THEN THE PEANUT PORTS they would replace
I know a guy who runs the parts department at a chevy dealer. I can buy these heads at cost. I was just wondering if they are worth using on a boat.
They are the heads that come on the crate 502/502
Oval port 110cc combustion chamber 2.25 and 1.88 stainless valves (NOT INCONNEL).
Are they any good?
THEY HAVE TO BE BETTER THEN THE PEANUT PORTS they would replace
Last edited by wtpowered; 03-25-2006 at 08:31 PM.
#2
Registered
Re: Anyone ever try GM Alum heads
Originally Posted by wtpowered
I was thinking maybe a set of casting #12363390
I know a guy who runs the parts department at a chevy dealer. I can buy these heads at cost. I was just wondering if they are worth using on a boat.
They are the heads that come on the crate 502/502
Oval port 110cc combustion chamber 2.25 and 1.88 stainless valves (NOT INCONNEL).
Are they any good?
THEY HAVE TO BE BETTER THEN THE PEANUT PORTS they would replace
I know a guy who runs the parts department at a chevy dealer. I can buy these heads at cost. I was just wondering if they are worth using on a boat.
They are the heads that come on the crate 502/502
Oval port 110cc combustion chamber 2.25 and 1.88 stainless valves (NOT INCONNEL).
Are they any good?
THEY HAVE TO BE BETTER THEN THE PEANUT PORTS they would replace
So the first (and a must) mod you must make is adding the roller rockers to the tune of about 325.00 bucks.
Last edited by ROTAX454; 03-25-2006 at 10:54 PM.