Help me build my 454, step by step
#21
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ok, machine shop magged and dipped the block, everythings ok.
He asked if i wanted to stud the block and align bore it?? he said it looks straight and doesnt think its necessary for what im going after but offered it. should i?
He asked if i wanted to stud the block and align bore it?? he said it looks straight and doesnt think its necessary for what im going after but offered it. should i?
#23
Jerry B
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Sep 2003
Location: Blue Springs Missouri.
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
There are many good comments here. Several have said to get a book or two. Tons of great info.
How much have you budgeted for this project? You can spend alot of money on good parts and not have the right combination to make the power and torque you want at the rpm you intend to use it. GM among others offer several crate engines that are dyno prven combinations and some even have a warranty of some kind.
I am looking at a Summit Performance catalog right now. A new GM ZZ502 Is 7459.95. 502 hp and could run on pump gas. All you need is carb and headers.
Any that is my 2 cents worth.
Good luck, Jerry.
How much have you budgeted for this project? You can spend alot of money on good parts and not have the right combination to make the power and torque you want at the rpm you intend to use it. GM among others offer several crate engines that are dyno prven combinations and some even have a warranty of some kind.
I am looking at a Summit Performance catalog right now. A new GM ZZ502 Is 7459.95. 502 hp and could run on pump gas. All you need is carb and headers.
Any that is my 2 cents worth.
Good luck, Jerry.
#24
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Jerry B
There are many good comments here. Several have said to get a book or two. Tons of great info.
How much have you budgeted for this project? You can spend alot of money on good parts and not have the right combination to make the power and torque you want at the rpm you intend to use it. GM among others offer several crate engines that are dyno prven combinations and some even have a warranty of some kind.
I am looking at a Summit Performance catalog right now. A new GM ZZ502 Is 7459.95. 502 hp and could run on pump gas. All you need is carb and headers.
Any that is my 2 cents worth.
Good luck, Jerry.
How much have you budgeted for this project? You can spend alot of money on good parts and not have the right combination to make the power and torque you want at the rpm you intend to use it. GM among others offer several crate engines that are dyno prven combinations and some even have a warranty of some kind.
I am looking at a Summit Performance catalog right now. A new GM ZZ502 Is 7459.95. 502 hp and could run on pump gas. All you need is carb and headers.
Any that is my 2 cents worth.
Good luck, Jerry.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#25
Jerry B
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Sep 2003
Location: Blue Springs Missouri.
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
As I understand it this engine is going into a nova. Not a boat.
I would not recommend it for a boat without modifications as Strippoker says.
Jerry.
I would not recommend it for a boat without modifications as Strippoker says.
Jerry.
#26
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Jerry B
As I understand it this engine is going into a nova. Not a boat.
I would not recommend it for a boat without modifications as Strippoker says.
Jerry.
I would not recommend it for a boat without modifications as Strippoker says.
Jerry.
I forgot it was for a car.oops
![Big Grin](/forums/images/smilies/biggrin.gif)
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#27
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
![Default](/forums/images/icons/icon1.gif)
i always have my blocks align honed so the bearing get the right crush for heat transfer, same with the rods have em resized and i always set the pins up as floating.
#28
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by ratman
i always have my blocks align honed so the bearing get the right crush for heat transfer, same with the rods have em resized and i always set the pins up as floating.
#29
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Unless you are trying to gain engine building skills, have you thought about crate motors ? It seems like what you want is a good application for a Chevy crate motor.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#30
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Well I have good news and bad news.
The bad news is the nova project is stopping.
The good news is I just picked up its replacement a 72 chevelle ss.
Its a small block car, and im going to leave it that way, so ill be back real soon to start the small block work up.
The bad news is the nova project is stopping.
The good news is I just picked up its replacement a 72 chevelle ss.
Its a small block car, and im going to leave it that way, so ill be back real soon to start the small block work up.