Best Person to port heads
#1
Registered
Thread Starter
Join Date: Feb 2004
Location: LOTO
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
Best Person to port heads
I kind of attached this thread to the dyno thread. But wanted to get peoples' opinions on who they have used to port their heads. I have Dart Pro One aluminum heads with 310 runners. I have been speaking to Jim V. - but wondering who everyone else is using. What additional hp does one expect to get from stock? Does this include port matching the intake manifolds? Thank you.
#2
Registered
Join Date: Apr 2005
Location: Northeast Pa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best Person to port heads
With a good port job we have seen 80+.
Mike
Roccard Marine Engines
www.roccardmarineengines.com
[email protected]
570-956-2840
Mike
Roccard Marine Engines
www.roccardmarineengines.com
[email protected]
570-956-2840
#3
Registered
Re: Best Person to port heads
Call Lynn Morris 405-631-3985 at Cylinder Head Porting. He has been porting heads since before I was born. Here is a pic of him working his magic...
#6
Registered
Thread Starter
Join Date: Feb 2004
Location: LOTO
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best Person to port heads
Ok, Dart Pro Ones' - are they different than other types of heads?
I appreciate the information on the recommendations. Looks like the guy I was talking to, Jim V., has at least one vote.
I appreciate the information on the recommendations. Looks like the guy I was talking to, Jim V., has at least one vote.
#7
Registered
Re: Best Person to port heads
Just give Lynn a call. I was just over at his place and he had a few sets of Harley heads and a set of Brodix Big Dukes he was working on.
#8
Registered
Gold Member
Re: Best Person to port heads
I had my Dart's CNC ported by Indy Cylinder Heads they did a sweet job and were fast and reasonably priced
One thing to watch for the accessory bolts on the front of my heads were 7/16 the Dart's that I used had 3/8 bolts holes and I had to have some 7/16 to 3/8 studs made
good luck Don
One thing to watch for the accessory bolts on the front of my heads were 7/16 the Dart's that I used had 3/8 bolts holes and I had to have some 7/16 to 3/8 studs made
good luck Don