502 Raw Water Pump Switch?
#1
Registered
Thread Starter
502 Raw Water Pump Switch?
I have a raw water cooled 1996 stock 502 with the orginal two piece raw water pump impeller housing, the impeller surround piece and the separate backing piece the hoses hook to. Can I switch to the one piece impeller housing/back piece? It all works fine now, just want to know if I can switch to the new style housing when needed. Thanks.
#2
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Re: 502 Raw Water Pump Switch?
Originally Posted by Pismo10
I have a raw water cooled 1996 stock 502 with the orginal two piece raw water pump impeller housing, the impeller surround piece and the separate backing piece the hoses hook to. Can I switch to the one piece impeller housing/back piece? It all works fine now, just want to know if I can switch to the new style housing when needed. Thanks.
#3
Registered
Join Date: Jan 2001
Location: Newburgh, NY USA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: 502 Raw Water Pump Switch?
I changed mine from the two piece to new one piece style without any issues. Mercury parts bulletin No. 96-8 states that the replacement body (P/N 47-71774A40) for the two piece pump is no longer available. I used P/N 46-807151A14 for the replacement. Hopes this helps.
David
David
#5
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: 502 Raw Water Pump Switch?
yes you can, the merc kit comes with everthing that you need,
as stated before the brass houseing lastes longer as long as you dont suck sand, but the plastic housing much cheaper
as stated before the brass houseing lastes longer as long as you dont suck sand, but the plastic housing much cheaper
Thread
Thread Starter
Forum
Replies
Last Post
terrygar
General Boating Discussion
6
08-04-2002 10:59 AM