Dart angle plug head question SBC
#1
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
I can get a set of angle plug dart heads,for a small block,will they fit with the exhaust on my boat? I have the stock center rise manifolds.
#2
I hate the winter!!
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
They will clear the manifolds without any problems. If you look at the heads, the plugs are angled in toward eachother. That actually helps clear them from the manifolds.
#3
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I was going to use GM's ZZ4 heads which are angled, and the plug boot was just clear of the manifold. This was with Stainless Marine Manifolds. Do a mock up on the bench before committing to anything!
#4
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
I am going to buy the since they are a local deal,after talking to him to see how the angle is I am sure they will be fine.
Thanks,Tim
Thanks,Tim