Electrical connectors and Tool ...
#2
Registered
Join Date: Feb 2006
Location: Lake Champlain
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: Electrical connectors and Tool ...
I use these bullet connectors for all my connection with heat shrink, I have never found them cheaper than this:
Fully Insulated Bullet Connectors
Any crimper should do fine...
Fully Insulated Bullet Connectors
Any crimper should do fine...
#3
Registered
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: Electrical connectors and Tool ...
I've been getting heat shrink connectors from bestboatwire.com.
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
#4
Registered
Thread Starter
Re: Electrical connectors and Tool ...
Originally Posted by Zanie
I've been getting heat shrink connectors from bestboatwire.com.
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan
Great customer service and the stuff ships out of Florida. Usually ships the same day.
The wire is nicely priced too.
http://bestboatwire.com/catalog/defa...cPath=51_55_56
Dan