What is the preferred RPM for Power vs. Reliability?
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
What is the preferred RPM for Power vs. Reliability?
I am running 2 502's. The cam and intake are matched for peak power at around 6k to 6500. Is this a good place to run the motors for reliability as well as power? Or would running them at a lower RPM say 5400 help them to last longer. 6k just seems like they are screaming back there.
I guess I'm looking for the sweet spot RPM vs. Power vs. Longevity.
My motors are 502's 9.5 : 1, Air gap intakes, Thunderbolt ignition with MSD Coils, Holley 850's, Gil manifolds, Gm Rec Heads, pocket ported and gasket matched.
Thanks Rob
I guess I'm looking for the sweet spot RPM vs. Power vs. Longevity.
My motors are 502's 9.5 : 1, Air gap intakes, Thunderbolt ignition with MSD Coils, Holley 850's, Gil manifolds, Gm Rec Heads, pocket ported and gasket matched.
Thanks Rob
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Demeanor
General Q & A
10
06-01-2007 06:42 AM