no timing advance
05-12-2006, 08:22 AM
#1
Registered
Thread Starter
Join Date: Mar 2004
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
no timing advance
When setting my timing , (with full msd ) I set my base timing at 20 degrees . No problem but when I rev the motor to 3000 rpms no advance kicks in ? Whats the deal .? It should be about 29 degress. Blower motor . I dont want more than 29 or 30. Is my MSD box on the blink ?
05-12-2006, 12:49 PM
#3
Registered
Re: no timing advance
Just read your other posts.
Is it a MSD distributor. If so, does it have a mechanical advance? Is it working?
If it's the Merc distributor, it is locked and advance is controled by the module.
An MSD box can be used with the merc distributor and module.
Is it a MSD distributor. If so, does it have a mechanical advance? Is it working?
If it's the Merc distributor, it is locked and advance is controled by the module.
An MSD box can be used with the merc distributor and module.
