pullmytrigger

did you see how much wieght you saved going from the stock Merc to the Stainless Marines???

2 Trick Rick

\


Let them Fry! I would like to know how those work for you.

ghittner

What happened with the test?

pullmytrigger

went out today......for some reason my handheld GPS would not lock onto the third satilite so it wouldnt work........first run of the season.....nice little chop on Lake Ontario great conditions actually......4 people in the boat half tank of fuel.......first time I hit the throttles to get on plane........whoa.....signifigantly more torque out of the hole even with four people in the boat......this was verified on a couple of more holeshots.......seemed to pick up the revs more freely........wound it out......hit 52 - 5300 rpm......have never hit 52 - 5300....only hit 5100 a handful of times and that was in perfect conditions, on fumes and always with only two people in the boat.......typical for the config I was running today would be 4800.....maybe 4900......5 grand no way no how

All in all the extra low end is really cool and an extra 300 to 400 on top.....even better.......Im running 21 Mirages......would like to see if it would pull a set of 23s with two people

CB-BLR

The 383 in my boat went from a consistant 4900-5000 to 5300-5400 by switching from the stock OMC manifolds to the Revolution Marines. -- Love um!!

Chris

Payton

Glad to hear the good reports. They seem like good guys up there, with a nice product.

AGGRAVATION28

Glad to hear you like them. You boating in fresh or salt? Whats the expected life if used in salt with flushing after use. Are they coated or anodized to protect from salt?

pullmytrigger

Obviously Lake Ontario is fresh.......didnt appear to anodized or anything on the inside but i could be wrong......didnt look too hard.......give Rev marine a call

2 Trick Rick

I may have missed it but what boat are you running them on?

pullmytrigger

1989 29 Fountain......twin stock 270hp smallblocks