Revolution Marine - 240lb wieght savings!
#41
Registered
Re: Revolution Marine - 240lb wieght savings!
Originally Posted by pullmytrigger
Oh sorry......thought the 300 rpm would be enough
#42
Registered
Re: Revolution Marine - 240lb wieght savings!
Originally Posted by Sutphil
"Not to ruffle anyones feathers" but this is the cutaway of a Revolution sbc manifold.
Look at #5 + #7 . If this won't provide a big restriction and some dilution I don't know what will.
Absolutely murder in this area.
#43
Registered
Thread Starter
Re: Revolution Marine - 240lb wieght savings!
Originally Posted by noboat
300 rpm with 21 pitch props equates to 2-3 mph. Is that what you picked up?
#44
Registered
Join Date: Oct 2000
Location: Ft Myers, Fl
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Revolution Marine - 240lb wieght savings!
Hey Trigger;
Some of us are still waiting to find out about how the Rev. manifolds helped the top end? Ya got us interested.....don't leave us out hanging. Are you satisfied with them? I've also got twin 350 cu in and don't want to spend any more than I have to, but don't want to go cheap and get nothing at all.
So, how about an update?
Some of us are still waiting to find out about how the Rev. manifolds helped the top end? Ya got us interested.....don't leave us out hanging. Are you satisfied with them? I've also got twin 350 cu in and don't want to spend any more than I have to, but don't want to go cheap and get nothing at all.
So, how about an update?
#45
Registered
Re: Revolution Marine - 240lb wieght savings!
Last edited by nordic95; 09-11-2006 at 07:29 PM.
#46
Registered
Join Date: May 2004
Location: Orlando, Florida
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: Revolution Marine - 240lb wieght savings!
Interested in one pair..
No PM capability.
No PM capability.
Originally Posted by nordic95
Just received my CMI's today so I need to move my two sets RM manifolds.
Nordic95
Nordic95
#49
Registered
Join Date: Nov 2006
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Revolution Marine - 240lb wieght savings!
Originally Posted by pullmytrigger
Are you talking smallblocks here??
RM is practially the only company out there that publishes a cutaway view of their smallblock manifold...... Stainless, Eddie and Gil and IMCO dont publish one as far as I could find(Ive tried) and KE doesnt make a smallblock manifold.......what do you base your "no comparison" theroy on?
RM is practially the only company out there that publishes a cutaway view of their smallblock manifold...... Stainless, Eddie and Gil and IMCO dont publish one as far as I could find(Ive tried) and KE doesnt make a smallblock manifold.......what do you base your "no comparison" theroy on?
WWW.PERFORMANCEMARINESPEEDSHOP.COM
#50
Registered
Re: Revolution Marine - 240lb wieght savings!
Thanks for the info. I thought everyone had forgotten the small block guys. I've put two pair on my Chirstmas Wish List.