Milky oil
#1
Registered
Thread Starter
Join Date: Jun 2006
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Engine buider completed two rebuids. After running the two motors out of the boat the oil in one was milky.
What should be done on my part along with his.
Also, the motors were supposed to be dynoed and now there not. What are my concerns, etc.
Please help!!!!
What should be done on my part along with his.
Also, the motors were supposed to be dynoed and now there not. What are my concerns, etc.
Please help!!!!
#3
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I dont know what area you are in but find someone that knows what they are doing to check them out, but all in all id be worried about a lot of things at this point if you want give me a call in the next 30 min or tomorrow and I will give you some tips to look for ......
#4
Registered
Thread Starter
Join Date: Jun 2006
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
What I don't understand is that they installed the motor in the boat anyway after knowing this!
I spoke to them today and they said they ran the motors in the boat. I forgot to ask about the oil situation.
I spoke to them today and they said they ran the motors in the boat. I forgot to ask about the oil situation.
#5
Masher touches my
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Aug 2004
Location: Phoenix, Az
Posts: 2,280
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I would guess head gaskets or cracked head. If it wasn't a fresh rebuild I would say to check your exhaust risers, especially if it had been sitting for a while. What head gaskets did they use? Felpro marine or Cometic? If they used some local part store stuff I would be concerned, I would also be concerned about the rest of the rebuild.
#6
Lakeside Restorations.com
![](https://www.offshoreonly.com/forums/images/icons/commercial_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Before jumping to conclusions are there oil coolers on this application?? Yes it could still be a HD gskt, but I have seen coolers do some funny stuff too.. Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#7
Masher touches my
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Aug 2004
Location: Phoenix, Az
Posts: 2,280
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by DONZI33
Before jumping to conclusions are there oil coolers on this application?? Yes it could still be a HD gskt, but I have seen coolers do some funny stuff too.. Jamie / Lakeside
That's a good idea, take it off and pressure test it.
#8
Lakeside Restorations.com
![](https://www.offshoreonly.com/forums/images/icons/commercial_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Thanks BADKACHINA...
Jamie
![Smilie](/forums/images/smilies/smile.gif)
![Smilie](/forums/images/smilies/smile.gif)
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#10
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
it could actually be one of many things from a pin hole in the intake under the stat to gaskets ect, as white scarab said I also dont under stand why they would drop it in with these problems unless they just want the $$$$