Drive Gear Question
08-01-2006, 04:33 PM
#1
Registered
Thread Starter
Join Date: Nov 2002
Location: SOUTHERN CALIFORNIA
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
Drive Gear Question
Does the gear ratios in a drive change at the upper section or the lower section?Other words are 1.5/1.36 gear ratios determined in the lower half of the drive or the upper half?
08-01-2006, 06:46 PM
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Drive Gear Question
Not so simple, a standard Bravo 1 is changed in the upper, an XR is in the lower, a B2 or B3 is a combinaiton of both. However 1.36 is a standard B1 ratio, the 1.35 is an XR.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
08-01-2006, 08:15 PM
#4
Charter Member
Charter Member
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drive Gear Question
Last edited by rbtnt; 10-31-2008 at 04:17 PM.
08-02-2006, 04:51 PM
#6
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drive Gear Question
Originally Posted by Mbam
Not so simple, a standard Bravo 1 is changed in the upper, an XR is in the lower, a B2 or B3 is a combinaiton of both. However 1.36 is a standard B1 ratio, the 1.35 is an XR.
I didnt know that. Sorry for the wrong information. I have been inside my XR a few times, I thought all Bravos were the same.
